Laborious manual procedures associated with tasks such as product changeovers can slow down surface-mount assembly and prolong line stoppages. A combination of advanced automation and features that enhance efficiency and flexibility can significantly increase productivity by minimising human intervention

Building the Smarter World
Smart “things” are becoming infused into the fabric of life. Highly automated manufacturing holds the key to producing the sheer numbers of units needed at an affordable price to be incorporated in equipment like appliances, buildings, vehicles, and industrial controls.

Minimising human intervention in setting up and changing-over high-speed surface-mount assembly lines is critical, to drive out errors, delays, and unproductive time when machines are stopped. In Europe, where manufacturers typically build a high mix of products for industrial, communication, medical, and advanced automotive applications, reducing the workload associated with product changeovers can significantly boost productivity.

Various approaches can be effective, using a combination of production-management software to minimise the setup adjustments needed during product changeover, and additional features built into the equipment itself. These can introduce various labour savings, such as eliminating laborious tasks like swapping placement heads, automating procedures like setting push-up pins, and innovations to allow routine tasks such as replenishing component reels to be done on the fly without stopping.

Reducing Changeover Workload
Using software tools to create production schedules and optimise equipment utilisation is essential. Tools provided by an equipment vendor can be especially helpful if control over key machines in the line such as screen printer, mounters, and inspection can be consolidated. These can consider the overall production requirements and the capabilities of specific lines and individual machines to create feeder configurations that are suited to building multiple different products. Suitable planning can minimise the numbers of changeovers needed on any given shift and hence avoid stoppages and human involvement. Various packages are available, such as the tools for programming and scheduling, production assistance, and M2M collaboration included in Yamaha’s YSUP intelligent factory software.

However, manufacturers need additional tools at their disposal if they are to successfully minimise machine stoppages and continue raising productivity. Any time a new setup requires a mounter to be fitted with a different placement head to handle special components, or feeders need to be changed or simply replenished, the affected machine, and often the entire line, may have to be stopped to allow skilled operators to complete the task.

There are various approaches to solving this issue. Multiple mounters may be installed inline, each setup optimally to place specific types of parts; a chip shooter dedicated to placing small, frequently used parts such as SMD passives can be installed next to a flexible mounter setup to handle a wider range of components. this may not be ideal, calling for extra investment in equipment and extra space in the factory.

Where money and square metres are precious, manufacturers can benefit by using a single, flexible mounter to handle all placement requirements. Yamaha developed the YRM20 next-generation mounter with new features that extend flexibility and automate processes that traditionally have involved time-consuming manual intervention.

This mounter utilises Yamaha’s one-head solution concept, which now enables even greater productivity with the high-speed rotary RM head (figure 1). This head operates at 115,0000 cph and can place components from 0201mm SMD chips to parts up to 12mm x 12mm and 6.5mm high. This allows placement of components such as large LEDs and popular IC styles including chip-scale package (CSP), quad flat package (QFP) and thin small-outline package (TSOP) at extremely high speed. There are also new feeders that are optimised to work with the RM head, which deliver parts at high speed and ensure accurate pickup.


Figure 1. The high-speed rotary RM head extends the one-head concept to provide high-speed placement for a wide component range.

In addition, Yamaha’s universal HM head extends the range of components to include larger parts like electrolytic capacitors, ball-grid array (BGA) ICs, and various types of connectors. A third option, the ultra-flexible FM head, caters for an even wider range including odd-shaped components and parts up to 55mm x 100mm x 30mm tall. Figure 2 illustrates the typical component types each head can handle.


Figure 2. The 115,000 cph RM head and others cover the gamut of surface-mount component types.

The YRM20 mounter is available in a choice of single-beam dual-beam configurations, giving users flexibility to operate two heads at the same time. To maximise the throughput possible with a two-head setup, Yamaha has incorporated the Overdrive motion technology proven in its Sigma family of high-speed mounters. This raises productivity by ensuring the two heads can work together with minimal interference (figure 3). Also developed from Sigma technology, the YRM20’s dual-stage conveyor enhances PCB support and handles panels up to 510mm wide at high speed to significantly reduce changeover time.


Figure 3. Yamaha’s Overdrive motion from the Sigma family ensures two placement heads can operate independently and interact efficiently.

Automating Changeovers
Automating various aspects of the product changeover sequence is also effective in reducing human intervention, to save time and eliminate errors. Auto program changeover saves operators from seeking out the right program to load and, instead, retrieves the correct placement machine program by scanning the barcode of the next board to be produced. When used with a powered tooling array, linking auto program changeover and automatic push-up pin exchange that raises the required pins to support the PCB during component placement, eliminates another, laborious manual task from the changeover sequence.

In addition, auto-loading feeders are available. These let operators quickly change component reels as they become emptied, ensuring the new carrier tape is correctly inserted without needing to stop the machine. Using Yamaha’s ALF auto-loading feeders, a new tape can be inserted on the fly in as little as five seconds.

With the YRM20, Yamaha has now extended this non-stop changeover concept to handle parts typically presented in trays, such as the largest ICs and connectors. The eATS30 non-stop tray feeder supplies these components continuously and introduces from a streamlined refilling procedure. A single pallet of tray components, or a complete magazine containing 10 pallets, can be inserted without stopping the machine thereby significantly increasing productivity.

Conclusion
By reducing laborious equipment-setup adjustments, such as changing placement heads, and extending non-stop component replenishment to include tray components as well as reels, human intervention in the routine activities can be greatly reduced. Benefits include fewer errors and greater equipment uptime, both contributing to increased productivity.

Relieving experienced operators of these mundane tasks allows them to focus on roles that are critically reliant on human skills and judgement, such as quickly diagnosing – and curing – the causes of any unexpected stoppages that may occur at any time. Additional tools are available to help with this, such as Yamaha’s QA Option software, bringing the benefits of human experience and advanced automation together in pursuit of the ultimate goal: continuously increasing productivity.

For more information, please visit the website at https://smt.yamaha-motor-im.de/.

About Yamaha Robotics SMT Section

Yamaha Surface Mount Technology (SMT) Section is a subdivision of Yamaha Motor Robotics Business Unit in Yamaha Motor Corporation. Yamaha surface mount equipment is highly acclaimed in the market for their “module concept” that enables them to keep pace with the trend toward smaller and more diverse electric/electronic parts being mounted on circuit boards.

Yamaha SMT Section has created a strong business in the surface mount industry that enables design and engineering, manufacture, sales and service to be conducted in one comprehensive system. Furthermore, the Company has used its core technologies in the areas of servo-motor control and image recognition technology for vision (camera) systems to develop solder paste printers, 3D solder paste inspection, 3D PCB inspection machines, flip chip hybrid placers, dispensers and intelligent SMD storage system. This allows Yamaha SMT Section to offer a full line of machines for electric/electronic parts mounting and propose optimum production-line makeup to answer the diversifying needs of today’s manufacturers.

Yamaha SMT Section has sales and service offices in Japan, China, Southeast Asia, Europe and North America provide a truly global sales and service network that will safeguard best in class on-site sales & service support for clients.

www.yamaha-motor-im.eu